• 0086-15800891578
Image

Different Ways For Purifying Different Waters – Purified Water Is Life

Different Ways For Purifying Different Waters – Purified Water Is Life

Treating water is normally due to the environmental factors of pollution, mixed in water and gets hard to use. The reaction of water is needed in labs to manufacture chemical compounds, in industries to dissolve, boil and manufacture items like shampoos, soaps, detergents, and lotions. For better quality, we need to disintegrate with quality raw materials used in the chemical reactions.

Renowned water treatment equipment supplier provides quality reactants to purify the water for drinking and other uses as it is likely to make seawater, wastewater, industrial, and impure water to be drinkable. They use different technologies and processes to make the drinkable water in reach to everyone.

PHOSPHONOBUTANE:

PBTCA has a moderate content of Phosphorus that has fundamental traits of both phosphoric acid and carboxylic acid combination, which empowers its sole order and rust repellant nature. Its antiscale quality under high heat is considerably greater than that of alcoholic compounds. It can increase zinc salt to dissolve, has good chlorine oxidation sensitivity and well-combined energy.

Usage:

PBTCA is a highly efficient agent as a scale and corrosion inhibitor. It is an excellent stabilizer for zinc salt. It can be used in conditions of unusual heat, high hardness, high alkali, and high consistency ratio. In lavation areas, it is used as a chelating tool and metal cleanser. 

PBTCA is usually used together with zinc salt, copolymer, organophosphate, imidazole, and other Water Treatment Chemicals. When used solely, the dosage of 5-15mg/L is favored. 

Package and Storage:

Normally In 250kg net Plastic containers, the IBC cans can also be practiced as needed. Storage for one year in room sheltered and sterile place.

Safety Protection:

Acidity, Evade dermo and optic contact, once contacted, rinse with water.

AMINO TRIMETHYLENE PHOSPHONIC ACID( ATMP)

Properties:

ATMP has a unique bonding structure, low inception interference, and web malformation finish. It can check layer configuration, calcium carbonate in particular, in the water system. ATMP has excellent biochemical balance and is difficult to be broken into its ions in the water system. At high densities, it has excellent corrosion restraint.

The solid-state of ATMP is glass particles, dispersible in water, quickly absorbent, favorable for practice in wintertime and chilling areas. Because of its extraordinary pureness, it can be used in knitting & dyeing businesses and as an ore surface handling agent. 

Usage:

ATMP is normally practiced with rag phosphoric acid, polycarboxylic acid, and salt to established all-natural alkaline water handling agents. ATMP can be practiced in several distinct circling cold water system. The dosage of 1-20mg/L is recommended. As an oxidation inhibitor, the dosage of 20-60mg/L is favored.

Packaging and Accommodation:

ATMP fluid: Usually In 250kg net Plastic Drum, IBC drum can further be used as needed ATMP regular: 25kg interior liner polyethylene (PE) case, exterior plastic knitted case, or approved by customers. 

Storage for ten months in place sheltered and sterile area.

Safety Protection:

Acidity, Evade dermo and optic contact, once contacted, rinse with water

Inquire Now